Fault Condition - Worcester ZWBR 7-28 HE plus Installation And Servicing Instructions

Commissioning
5.9

Fault Condition

A list of faults that may occur is given on
i
page 46.
In the unlikely event of a fault occuring while the appli-
ance is in operation:
The display and the text display then show a fault code
and the button may also flash.
If the button flashes:
y Press and hold the button
„– –".
The appliance will then start up again and the display
will show the central heating flow temperature.
If the button does not flash:
y Switch the appliance off and then on again at the
master switch.
The appliance will start up again and the central heat-
ing flow temperature will be displayed.
26
until the display shows
6 720 610 597 GB (01.07)