Fault Condition - Worcester GREENSTAR CDi CLASSIC User Instructions

Operating the boiler
3.9

FAULT CONDITION

In the event of a fault occurring while the boiler is in operation
the reset button [2] and the fault indicator [3] will flash.
The display [1] will show a fault code (for fault codes see
section 4.3 on page 16).
Fig. 8
To reset the boiler:
▶ Press the reset button [2] for three seconds.
The reset button [2] and the fault indicator [3] will stop
flashing.
The boiler will function normally, dependent on
programmer and room thermostat settings.
If the fault cannot be cleared by pressing the
reset button:
▶ Refer to the fault finding section on
page 15 of this user guide.
▶ Call Worcester, Bosch Group, giving a
description of the fault and, if possible,
the fault code from the display.
Alternatively contact other Gas Safe
registered personnel for assistance.
12
1
3
GREENSTAR CDi CLASSIC COMBI – 6 720 812 179 (2014/07)
2
6 720 812 178-08.1O