Using The Monitor - Behringer X32 Reference Manual

5.2 USING THE MONITOR

The monitors are configured to provide you with a complete monitor mix, vocals and instrument (or
any combination) on three separate channels, controlled independently from the monitor. These
channels have been labelled on the monitor for your convenience.
Each channel is configured as follows:
Monitor – use this channel to adjust the monitor channel settings
My Vocal – use this channel to adjust your own vocal settings (if you are singing)
My Inst – use this channel to adjust your instrument settings (if you are playing an
instrument)
The master volume knob is used to adjust the overall volume of the monitor.
To adjust the channels, see Section 5.3 for specific information on how to accomplish this – in most
instances, you will only require setting the Level, although there are options for EQ and reverb.
Page 28