Configuring For A Basic Service (No Band) - Behringer X32 Reference Manual

3.1 CONFIGURING FOR A BASIC SERVICE (NO BAND)

For a basic service with no band – you will want to load the SBF Default scene – this is accomplished
by going to the SCENE section on the far right of the sound board, and pressing the VIEW button
(circled below).
Figure 16 - Selecting the SCENE View
The screen will then show a page that is mostly blank, because we don't use this feature – you will
need to use the right arrow key to move over to the SCENE tab.
Figure 17 - Home Screen showing SCENES tab
Page 14