Setting Up The Band - Behringer X32 Reference Manual

2.0 SETTING UP THE BAND

In addition to setting up the basic service as outlined in Section 1.0, if you have a band it will be necessary to
configure monitors, hook up instruments and microphones. The following sections provide specific details
for a cross section of common configurations encountered at SBF.
As you set up the band, it is helpful to use one of the provided worksheets (see illustration below) to record
the stage setup up and simplify configuring the sound board.
Figure 2 - SBF Stage Map (available as worksheet)
Once the band is set up, you should proceed to Section 3.0 to configure the sound board.
Page 2