AC-40
AIR CONDITIONING SYSTEM _ BLOWER UNIT
1. REMOVE AIR INLET DAMPER CONTROL SERVO.
MOTOR
Remove the 2 screws and the air inlet damoer control
servomotor.
2,
REMOVE BLOWER MOTOR
(a) Remove the screw and wire harness clamp.
(b) Remove the 3 screws and the blowor motor.
BLOWER UNIT ASSEMBLY
Assemble by following the disassombly procedure in
reverse order.
BLOWER UNIT INSTALLATION
1. INSTALL BLOWER UNIT
Install by following tho 16moval procedure in reverse
order.
2,
INSTALL COOLII{G UNIT
(See pase AC-33)