Toyota Celica 1993 AT200 series Repair Manual page 1028

AC-73
AIR CONDITIONING SYSTEM - BLOWER RESISTOR
BLOWER RESISTOR
BLOWER RESISTOR REMOVAL
1, DISCONNECT NEGATIVE (_) TERMINAL CABLE
FROM BATTERY
CAUTION: Work must bo startod Eftcr 90 rccondr from
t h o t i m e t h o i g n i t i o n s w i t c h i 8 t u r n e d t o t h o ' L O C K '
p o s i t i o n r n d t h 6 n o g r t i v o ( - ) t o r m l n a l c a b l c l s d b c o n -
noctod trom thc battcry.
2.
REMOVE GLOVE BOX ASSEMBLY
(See pase BO - 52)
3.
REMOVE BLOWER RESISTOR
(a) Disconnect th6 connector from the blower resistor.
(b) Remove th€ 2 screws and the blower resistor,
BLOWER RESISTOR INSPECTION
lf continuity is not as specified, replace the blower
resistor.
BLOWER RESISTOR INSTALLATION
1. INSTALL BLOWER RESISTOR
(a) Install the blower resistor with the 2 screws.
(b) Connect the connsctor to th€ blow6r resistor,
2. INSTALL GLOVE BOX ASSEMBLY
(Sce page BO-52)
3.
CONNECT f{EGATIVE (_)TERMINAL CABLE FROM
BATTERY
INSPECT BLOWER RESISTOR CONTINUITY
Condition
Testar conhgction to
torminal number
Spccificd vrluo
Constant 1 - 2 - 3 - 4
Continuity