AC-52
AIR CONDITIONING SYSTEM _ COMPRESSOR
(b) Using SST. install the snap ring into the front housing.
s s T 0 7 1 1 4 - 8 4 0 1 0
7,
INSTALL FRONT HOUSING
(a) Install 2 pins in the front cylindsr.
(b) Lubricate a new O - ring with compressor oil and
install it in ths front housing.
(c) Install the front suction reed valve over th6 pins on the
front cvlinder.
AC
V a l v e P l a t e
D i s c h a r g e
A C 1 1 1 2
V a l v e
G a s k e t
(d) lnstall the front valve
valve over the oins on
HINT: The front valve
plato with the discharge reed
the front cylinder.
plate is marked with an 'F".
(e) Lubricate a new gasket with compressor oil and install
the gasker on the valve plate.
Set SST on th€ shaft to
s s T 0 7 1 1 2 - 8 5 0 1 0
protoct th6 lip seal.
(f)