Pfaff expression 150 Owner's Manual page 28

Beading foot, 4 mm
For that extra touch, highlight any sewing project
with strings of pearls or beads. The beads will run
smoothly through the groove under the foot while
you sew for beautiful results.
1. Snap on the Beading Foot.
2. Thread your machine with invisible thread
in the needle and regular sewing thread that
matches the fabric in the bobbin.
3. Select either the zigzag stitch or the blindhem
stitch with the following settings:
Zigzag stitch: length 3.5, width 4.0
Blindhem stitch: length 1.0, width 4.5
4. Lower the needle thread tension to achieve a
beautiful stitch.
5. Place stabilizer under the fabric and position
both under the foot.
6. Place the bead string under the foot in the
groove on the underside of the beading foot.
Lower the presser foot.
7. Turn the hand wheel to create manual stitches
to set the beads in place.
8. Stitch slowly.
Note: Stitch the bead string to a scrap piece of fabric
rst to test thread tension, stitch length and stitch width
according to the beads and the fabric. Make adjustments
as needed.
Piping foot
Insert packaged piping into seams and edges for a
tailored nish. Cover cord with fabric for specialty
piping.
To stitch piping into a seam:
1. Snap on the Piping Foot
2. Place piping along the seam line on right side
of fabric. Place second piece of fabric on top
with right sides together.
3. Put fabric and piping layers under Piping Foot
with the piping in the groove on the underside
of the foot. Sew with a straight stitch, length
2.5. The groove on the underside of the foot
will guide the piping as you sew.
28 - Sewing