Led Display - Theben PresenceLight 180A-KNX series Operating Manual

9.1 LED display

LED
Blinking in 1 second
tact
Flickering during
3 sec
Lights up shortly
Fast blinking
Blinking, 3 sec On
0.3 sec Off
Lights or flickers
irregularly
Description
The presence detector is in the start-up phase. See page 72.
The command sent from the management remote via infrared is rejected by
the presence detector.
Is the request consistent with the setting in the presence detector, the
detector confirms.
The command sent from the management remote via infrared is rejected by
the presence detector. The command is not valid. Check the detector type
selected in the SendoPro 868-A.
Is the request not consistent with the setting in the presence detector, the
detector responds accordingly.
Error blinking; The presence detector has found an error. See page 80
The presence detector is in test lighting. See page 77
The presence detector is in test presence see page 75. The LED displays detec-
tion of movement.
GB
81