Safety, Installation And Warranty Requirements - Viessmann Vitodens 100-W WB1B Series Installation Instructions Manual

Introduction

Safety, Installation and Warranty Requirements

Please ensure that these instructions are read and understood before commencing installation. Failure to comply with
the instructions listed below and details printed in this manual can cause product/property damage, severe personal
injury, and/or loss of life. Ensure all requirements below are understood and fulfilled (including detailed information
found in manual subsections).
Licensed professional heating contractor
The installation, adjustment, service and maintenance
of this equipment must be performed by a licensed
professional heating contractor.
Please see section entitled
"Important Regulatory and Installation
Requirements" in the Installation
Instructions.
Product documentation
Read all applicable documentation before commencing
installation. Store documentation near boiler in a
readily accessible location for reference in the future
by service personnel.
For a listing of applicable literature,
please see section entitled "Important
Regulatory and Safety Requirements"
in the Installation Instructions.
Carbon monoxide
Improper installation, adjustment, service and/or
maintenance can cause flue products to flow into
living space. Flue products contain poisonous carbon
monoxide gas.
For information pertaining to the
proper installation, adjustment, service
and maintenance of this equipment to
avoid formation of carbon monoxide,
please read these Installation Instructions
carefully.
How these Installation Instructions are structured....
These Instructions cover the following venting systems
for the Vitodens 100-W and 200-W boilers.
Refer to the section applicable to your application for
pertinent installation information.
Before proceeding with the installation, please read
sections entitled Safety and General Information.
These sections are applicable to all venting systems listed
and must be read before commencing the installation.
2
Rigid Venting Systems Installation Instructions
Equipment venting
Never operate boiler without an installed venting
system. An improper venting system can cause
carbon monoxide poisoning.
Warranty
Information contained in this and
related product documentation must
be read and followed. Failure to do
so renders the warranty null and void.
Advice to owner
Once the installation work is complete, the heating
contractor must familiarize the system operator/
ultimate owner with all equipment, as well as safety
precautions/requirements, shutdown procedure, and
the need for professional service annually before the
heating season begins.
WARNING
Installers must follow local regulations with respect
to installation of carbon monoxide detectors. Follow
manufacturer's maintenance schedule boiler.
Information specific to...
Side Wall Vent Installations (Coaxial) is found in the
g
Side Wall Vent Installation Section starting on page 14.
Vertical Vent Installations (Coaxial) is found in the
g
Vertical Vent Installation Section starting on page 23.
Direct Vent Installations (Two-pipe System) is found in
g
the Direct Vent Section starting on page 32.
Single Pipe Vent Installations (Room Air Dependent) is
g
found in the Single Pipe Venting Section starting on
page 62.