8
Q6. The screen changes if no operation takes place for a certain period of time. Can this
8.6
Q6. The screen changes if no operation takes place for a certain
period of time. Can this time setting be changed?
A6. Yes, you can change the following time settings via the administrator settings.
-
Time to elapse before transition to the Low Power and Sleep modes
-
Time to elapse before all functions are reset to the default settings
-
Time to elapse before settings by function are reset to the default settings
How to set: Setting time to pass before transition to Low Power or Sleep
mode
1
Tap [Utility], then select [Administrator Settings].
2
Enter the password, then tap [OK].
3
Select [System Settings] - [Power Supply/Power Save Settings].
4
To set the time to pass before entering Low Power mode, tap [Low Power Mode Settings], enter the
time, then tap [OK].
% To set the time to pass before entering Sleep mode, tap [Sleep Mode Settings], enter the time, then
tap [OK].
% More electric power will be saved in Sleep mode when compared with Low Power mode. However,
Sleep mode takes more time to warm up this machine for additional print jobs than Low Power
mode. Select the mode appropriate to your application of this machine.
8-12
d-Color MF552/452/362/282/222
8.6