Using The Voice Recognition Function (For Iphone); Notes For Hands-Free Phoning - Pioneer SPH-DA120 Operation Manual

Chapter
04 Using hands-free phoning
% Touch the following key.
p This function can be performed even while
talking on the phone.
p Settings can be stored for each device.
Using the voice recognition
function (for iPhone)
You can use the voice recognition function of
iPhone.
p When an iPhone running iOS 6.1 or higher
is used, Siri Eyes Free Mode is available
with this product.
p For using the voice recognition function in
Apple CarPlay, refer to Using Apple CarPlay
on page 64.
1 Touch the HOME button to display the
Top menu screen.
2 Touch the following keys to start voice
control.
The voice recognition function launches and
the voice control screen appears.
You can use the voice recognition function in
the same way as using it on the iPhone.
p You can also launch the voice recognition
function by touching and holding the
HOME button.
28
Engb
Switches between the three vo-
lume levels.
Indicates that this product is on
standby for your voice commands.
Cancels the voice recognition
function.

Notes for hands-free phoning

General notes
! Connection to all mobile phones featuring
Bluetooth wireless technology is not guar-
anteed.
! The line-of-sight distance between this pro-
duct and your mobile phone must be
10 metres or less when sending and receiv-
ing voice and data via Bluetooth technol-
ogy. However, the actual transmission
distance may be shorter than the estimated
distance, depending on the usage environ-
ment.
! With some mobile phones, the ring sound
may not be output from the speakers.
! If private mode is selected on the mobile
phone, hands-free phoning may be dis-
abled.
Registration and connection
! Mobile phone operations vary depending
on the type of mobile phone. Refer to the
instruction manual that came with your
mobile phone for detailed instructions.
! With mobile phones, phone book transfer
may not work even though your phone is
paired with this product. In that case, dis-
connect your phone, and then perform
pairing again from your phone to this pro-
duct.
! The Bluetooth connection will be termi-
nated if Apple CarPlay is turned on.
! If Apple CarPlay is turned on during a call
on a mobile phone other than the iPhone
connected to use Apple CarPlay, the
Bluetooth connection will be terminated
after the call ends.