Receiving Traffic Announcements - Pioneer SPH-DA120 Operation Manual

Using the radio
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [AV Source Settings].
4 Touch [Radio Settings].
5 Touch [Local].
The pop-up menu appears.
6 Touch the item you want to set.
FM
! Off (default):
Turns the seek tuning setting off.
! Level1:
Sets the level of sensitivity for FM to level 1.
! Level2:
Sets the level of sensitivity for FM to level 2.
! Level3:
Sets the level of sensitivity for FM to level 3.
! Level4:
Sets the level of sensitivity for FM to level 4.
MW/LW
! Off (default):
Turns the seek tuning setting off.
! Level1:
Sets the level of sensitivity for MW/LW to
level 1.
! Level2:
Sets the level of sensitivity for MW/LW to
level 2.
p The FM "Level4" (MW/LW "Level2") setting
allows reception of only stations with the
strongest signals, while lower settings
allow reception of those with weaker sig-
nals.
Receiving traffic
announcements
p This function can only be used on the FM
band.
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an-
other enhanced network's TP station (a station
carrying information that cross-references TP
stations).
1 Touch the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [AV Source Settings].
4 Touch [Radio Settings].
5 Touch [TA Interrupt] repeatedly until
the desired setting appears.
! Off (default):
Does not receive traffic announcements
automatically.
! On:
Receives traffic announcements automati-
cally.
6 Tune into a TP station or another en-
hanced network's TP station.
7 Use the VOL (+/–) button to adjust the
TA volume when a traffic announcement
begins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
p You can cancel the news programme by
changing the source.
p The system switches back to the original
source following traffic announcement re-
ception.
Chapter
06
37
Engb