Setting The Video Output Format - Pioneer SPH-DA120 Operation Manual

Chapter
20 Setting up the video player
5 Touch the item you want to set.
! Auto (default):
Adjusts the video signal setting automati-
cally.
! PAL:
Sets the video signal to PAL.
! NTSC:
Sets the video signal to NTSC.
! PAL-M:
Sets the video signal to PAL-M.
! PAL-N:
Sets the video signal to PAL-N.
! SECAM:
Sets the video signal to SECAM.
Setting the video output
format
You can switch the video output format of the
rear display between NTSC and PAL.
p The video output format setting has no ef-
fect on AUX, AV, and iPod sources (when
the control mode is set to iPod).
p This function is available when nothing is
output to the front screen, and a source
other than USB1 and USB2 is output to the
rear display.
1 Touch the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The "Video Setup" screen appears.
3 Touch [Video Output Format] repeat-
edly until the desired setting appears.
! PAL (default):
Sets the video output format to PAL.
! NTSC:
Sets the video output format to NTSC.
102
Engb