Pioneer SPH-DA110 Startup Manual

AppRadio Mode
SPH-DA110
You can control applications for
AppRadio Start Up Guide
mobile devices directly on this
English product (AppRadio Mode). To use the
AppRadio Mode, install the AppRadio
app on the mobile device beforehand
This guide is intended to introduce you to the basic functions of AppRadio.
to enable launching of the application
on this product.
Notes
For details about the AppRadio app,
! Pioneer is not responsible for any cellular voice, data, and application fees you may
visit the following site :
incur.
! The screens shown in the examples may differ from actual screens. Actual screens U.S.A. :http://www.pioneerelectronics.com/AppRadioMode
may be changed without notice for performance and function improvements.
Canada :http://www.pioneerelectronics.ca/AppRadioMode
AppRadio is an innovative car audio system with a 7-inch capacitive touch panel
screen display that when used along with AppRadio Mode, facilitates the use of
mobile device applications from Pioneer and other providers in the vehicle. Using the AppRadio Mode
In addition to the basic functions such as radio and Bluetooth ® hands-free
1. Press Home button and tap 3. Tap [Apps].
phoning, you'll have full access to the AppRadio-compatible mobile device [Settings] l [App Connection
applications when a mobile device is connected. Settings] to select your device
setting as follows.
For details of functions and operation of this product, refer to the Operation
iPhone (Digital AV): iPhone / iPod
Manual by scanning the following QR code.
with Lightning connector
Others: iPhone / iPod with 30-pin,
Android device, MirrorLink device
4. Tap an application icon.
For iPhone For Android TM adevice and
2. Connect a mobile device.
MirrorLink TM device
When an iPhone with Lightning
connector or Android device is
connected, you must make the
Bluetooth connection with Serial Port
Profile (SPP) from this product.
Only when an Android device
is connected and the Bluetooth
connection is established, the [Apps]
icon will be changed to .
© 2013 PIONEER CORPORATION.
All rights reserved. Printed in Thailand
<KMZAX> <13D00000> <CRD4685-A/N> UC
Connecting a mobile device Hardware buttons
AppRadio Mode should only be used in the connection configuration shown. Do not
use any other configuration when connecting your device.
Please check the [App Connection Settings] setting before connecting a
mobile device. Refer to Using the AppRadio Mode in this guide.
 Volume (+/–) button
Connecting your iPhone with Lightning connector
1. Connect your iPhone to this product via the separately sold HDMI/USB  Home button
interface for iPod / iPhone (CD-IH202).
*1 *2
The Lightning to USB Cable *1 (CD-IU52) (sold separately) and the Lightning Digital
* The buttons are available while operating the application in the AppRadio Mode
*2
AV Adapter (Apple Inc. products) (sold separately) are required for connection.
2. Register your iPhone and make the Bluetooth connection.
For detailed procedures, refer to Registering your Bluetooth device in this guide.
Connecting your iPhone with 30-pin
Connect your iPhone to this product via the separately sold USB interface cable for Switching screen by the hardware buttons
iPod / iPhone (CD-IU201N).
One of the screen transition from the Home screen is as shown below.
Connecting your Android device
1. Connect your Android device to this product via the separately sold App
Connectivity Kit (CD-AH200).
Connecting an Android device with an HDMI port
You can operate applications with
finger gestures such as tapping,
dragging, scrolling or flicking on the
screen of this product.
When an Android device is first Connecting an Android device with an MHL port
connected to this product, touch the
white dot to activate the connection.
2. Register your Android device and make the Bluetooth connection with
Serial Port Profile (SPP).
For detailed procedures, refer to Registering your Bluetooth device in this guide.
Audio source control keys
When you press the Home button twice, the audio source control keys will be
displayed on-screen. Using these keys, you can operate the audio source currently
    playing in the background without leaving the screen currently displayed.
With the MIX function, you can listen to the audio of the radio, or music on the
3 Menu button*
connected iPod/Bluetooth audio device while using the Apps/MirrorLink source.
Press to adjust the AV volume.
Press to display the Application

menu screen.
Press to display the Home screen. 4 Back button*
In the AppRadio Mode and the
Press to return the previous screen.
MirrorLink mode, press to display the
  
Application menu screen.
Press twice to display the Audio  Selects whether to mix the audio 4 MIX ON: switches the source screen
source control keys.
output of the application with the to be controlled in the Apps or
audio output of the radio, Bluetooth, MirrorLink source.
or iPod in the Apps or MirrorLink MIX OFF: displays the Home screen
or MirrorLink mode. source (for Android and MirrorLink
in the Apps or MirrorLink source.
devices).
This function is disabled in the other
sources.
 Switches the audio source between
muted and unmuted .
5 Switches between playback and pause
3 Moves to the next or previous song, when [iPod], [Apps], [MirrorLink],
file or chapter when [iPod] , [Apps], [Pandora] or [Bluetooth] is selected
[MirrorLink] or [Bluetooth] is as the source.
selected as the source. Switches the frequency bands when
Moves to the next or previous preset
Home screen [Radio] is selected as the source.
channel when [Radio] is selected as
6 Turns the screen off. To turn it back
the source. Skips the current song
on, tap anywhere on the screen or
when [Pandora] is selected as the
press the Home, Menu or Back
source.
button.
twice
Listening to the radio
When you tap the [Radio] icon on the Home screen, the radio source screen
Audio source control keys
appears and the broadcast starts. You can control the radio source by tapping the
control key.

 Switches the frequency bands.
 Selects a preset channel.
3 Adjusts the frequency manually.
To keep touching searches for receiv-
able frequencies.
Application menu screen Application operation
screen
AppRadio Mode screen
 3
Playing iPod music or videos Registering your Bluetooth device
When an iPod is connected to this product, an [iPod] icon becomes active on the 1. Tap the
Home screen. When you tap [iPod] on the Home screen, the iPod audio source corner of the Home screen to
display the phone menu.
screen appears. You can control playback by tapping the control keys.
2. Tap the
• When an iPhone with Lightning connector is connected, [iPod] is disabled. For
"Bluetooth Connection Menu".
iPhone with Lightning connector, please use the CarMediaPlayer to play music or
videos in the AppRadio Mode. For details about CarMediaPlayer, visit our web site.
 Tapping the key or the key
skips to the start of the current/next
playback. Touching and holding the
 
key or the key performs fast
reverse/fast forward.
 Switches between playback and
pause.
3. Tap the [Connection].
3 Selects the repeat range.
4 Plays songs or videos in random
       3  4
order.
Selecting the audio/video source
1. Tap the icon on the upper right corner to display the playlist screen.
2. Locate and tap the (audio) or (video) icon to be played from the
playlist.
4. Tap the
Playing Bluetooth audio music
of registerable devices.
You can control the Bluetooth
connection of the audio devices, and
play and operate the audio source.
1. Connect your audio device
that supports A2DP/AVRCP
profile(s) with Bluetooth wireless
technology.
2. Tap the [Bluetooth] icon on the
Control Keys
Home screen.
Disconnecting and re-connecting your device
The audio source screen appears.
Before using the Bluetooth audio
Tap the name of your device in the registered device list to disconnect the Bluetooth
3. Tap the control keys to playback function, first use the device to pair this
connection. To connect your device and this product again, tap the name of your
the audio source.
product with it. device in the registered device list.
When a device that supports the For detailed procedures, refer to
Hands-free phoning
Registering your Bluetooth device in this
A2DP with the AVRCP is connected,
guide.
the playback information may be You can control the Bluetooth connection of the mobile device, and make a call
displayed.
using the incoming/outgoing call histories, transferred contacts, or by dialing.
TM
MirrorLink
icon on the upper right 5. Tap the name of the device you When you connect a MirrorLink device with MirrorLink compatible applications
want to register in the device list. installed, you can control applications for the mobile device directly on this product
(MirrorLink mode).
6. When PIN code input is required,
Connecting your MirrorLink device
icon to display the enter the PIN code (the default
PIN code is "0000").
Please check the [App Connection Settings] setting before connecting a
The icons in the device list are
mobile device. Refer to Using the AppRadio Mode in this guide.
illuminated as follows.
Connect your MirrorLink device to this product via the separately sold USB interface
cable for MirrorLink (CD-MU200).
Icons Conditions
Illuminates when your mobile
device is successfully con-
nected with the HFP (Hands-
Free Profile).
Using the MirrorLink mode
Illuminates when your audio
device is successfully con-
1. Connect a MirrorLink device. 3. Tap an application icon.
nected with the A2DP
(Advanced Audio Distribution
Profile)/AVRCP (Audio/Video
Remote Control Profile).
Illuminates when the Bluetooth
connection is established with
icon to display a list
the SPP (Serial Port Profile).
[MirrorLink] becomes active.
The application launches, and
2. Tap [MirrorLink].
the Application operation screen
If the launcher application is appears.
installed in the MirrorLink device, the
You can operate applications with
application launches.
finger gestures such as tapping,
If not, the Application menu screen
dragging, scrolling or flicking on the
appears.
screen of this product.