Graco MAGNUM LTS 15 257060 Operation Manual page 33

Working pressure range
Electric motor
Operating horsepower
Maximum delivery (with tip)
Paint hose
Maximum tip hole size
Weight, sprayer only
Weight, sprayer, hose & gun
Dimensions (Upright):
Length
Width
Height
Dimensions (Folded):
Length
Width
Height
Power cord
Fluid inlet fitting
Fluid outlet fitting
Inlet screen (on suction tube)
Wetted parts, pump & hose
Wetted parts, gun
Generator requirement
Electrical power requirement
Storage temperature range ◆❖
Operating temperature range ✔
◆ When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in
pump.
❖
Damage to plastic parts may result if impact occurs in low temperature conditions.
✔
Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
313034H
M ProLTS 17
AGNUM
0-3000 psi
(0-21 MPa, 0-207 bar)
5.8A (open frame,
permanent magnet DC)
3/4
0.34 gpm (1.29 lpm)
1/4 in. x 25 ft
(6.4 mm x 7.5 m)
0.017 in. (0.43 mm)
33 lb (20 kg)
36 lb (21kg)
21.25 in. (54 cm)
15.25 in. (39 cm)
36.75 in. (93 cm)
21.25 in (54 cm)
15.25 in (39 cm)
30 in. (76 cm)
16 AWG, 3-wire, 6 ft (1.8 m)
3/4 in. internal thread (standard garden hose thread)
1/4 NPSM external thread
stainless steel, brass, leather, ultra-high molecular weight polyethylene
(UHMWPE), carbide, nylon, aluminum, PVC, polypropylene,
aluminum, brass, carbide, nylon, plated steel, stainless steel,
120 Vac, 60 Hz, 15A, 1 phase
-30° to 160°F (-35° to 71°C)
40° to 115°F (4° to 46°C)
M
AGNUM
0-3000 psi
(0-21 MPa, 0-207 bar)
9.4A (open frame,
permanent magnet DC)
0.38 gpm (1.44 lpm)
1/4 in. x 50 ft
(6.4 mm x 15 m)
0.019 in. (0.48 mm)
33 lb (20 kg)
36 lb (21 kg)
21.25 in. (54 cm)
15.25 in. (39 cm)
36.75 in. (93 cm)
21.25 in. (54 cm)
15.25 in. (39 cm)
30 in. (76 cm)
35 mesh (450 micron)
fluroelastomer
UHMWPE, zinc
1500 Watt minimum
Technical Data
ProLTS 19
7/8
33