Graco MAGNUM LTS 15 257060 Operation Manual page 21

NOTE: Step 16 is for returning paint in hose back to
paint pail. One 50-ft (15-m) hose holds approximately
1-quart (1-liter) of paint.
16. To preserve paint in hose:
a. Point gun into paint pail.
b. Unlock gun trigger lock.
c. Pull and hold gun trigger.
d. Turn Prime/Spray valve to
SPRAY.
e. Turn power switch ON.
f. Continue to hold gun trigger
until you see paint diluted with
water starting to come out of
gun.
17. While continuing to trigger
gun, quickly move gun to
redirect spray into waste
pail. Continue triggering
gun into waste pail until
water coming out of gun is
relatively clear.
18. Stop triggering gun. Engage trig-
ger lock.
313034H
19. Turn prime/spray valve to Prime.
20. Turn power switch OFF.
ti8909a
ti9345a
21. Turn off garden hose. Close
Power Flush attachment.
ti5580a 22. Unscrew Power Flush attachment
from suction tube.
23. Clean InstaClean Fluid Filter and
gun, page 22.
24. Fill unit with Pump Armor
Term Storage, page 23.
ti9745a
ti8908a
Shutdown and Cleaning
ti9346a
ti2810a
ti9413a
ti2047a
™
storage fluid. Read Long
21