Table of Contents
Advertisement
USB 2.0 (EHCI) Support
Use this item to enable or disable USB 2.0 (EHCI) support. The optional settings
are: [Enabled]; [Disabled].
High Precision Event Timer Configuration:
High Precision Timer
The optional settings are: [Enabled]; [Disabled].
SLP_S4 Assertion Width
Use this item to select a minimum assertion width of the SLP_S4# signal.
Restore AC Power Loss
Use this item to select AC power state when power is re-applied after a power
failure (G3 State). The optional settings are: [Power Off]; [Power On]; [Last State].
42
Advertisement
Table of Contents
