JETWAY G03-NF9C-F Technical Manual page 46

► Host Bridge
Press [Enter] to make settings for Intel IGD Configuration:
Internal Graphics:
Use this item to keep IGD enabled based on the setup options. The optional
settings are: [Disabled]; [Auto].
IGFX-Boot Type
Use this item to set the video device which will be activated during POST. This has
no effect if external graphics presents.
The optional settings are: [VBIOS Default]; [CRT]; [HDMI]; [LVDS2]; [LVDS1];
[CRT+HDMI]; [LVDS1+HDMI]; [CRT+LVDS2]; [CRT+LVDS1].
Active LFP
The optional settings are: [Disable LVDS]; [Enable LVDS].
In the case IGFX-Boot Type is set as [LVDS2], [CRT+LVDS2] the following
setting item shall appear:
LCD Panel Type:
The optional settings are: [1024 x 600]; [800 x 600]; [1024 x 768 18bit]; [1366 x
768]; [1200 x 800].
► South Bridge
Azalia Controller
The optional settings are: [Enabled]; [Disabled].
UHCI #1 (Ports 0 and 1)/ UHCI #2 (Ports 2 and 3)/UHCI #3 (Ports 4 and
5)/UHCI #4 (Ports 6 and 7)
Use this item to control the USB UHCI (USB 1.1) functions. The optional settings
are: [Enabled]; [Disabled].
41