A/V Configuration - CYBEX 770T Owner's Manual

A/V Configuration

Access Setup Screen
ENGLISH
1. Tap the Access Toolbox icon to display the Access to Toolbox login screen.
2. Enter the sequence:
3. Tap the Setup icon to display the setup menu.
4. Tap the A/V Config icon.
Touch calibration
Network setup
Channel setup
5. Exit Set Up Mode by
will refresh.
Setup Complete
Your treadmill is now ready for use. Proceed to Testing the Treadmill Operation. Follow the
instructions in the Operation chapter to learn how to operate the treadmill. You should begin with
walking speeds first, to be sure everything is functioning properly.
Cybex Owner's Manual
CYBEX Press and hold Cybex logo for 6 seconds to access Screen
LOGO Lock and Toolbox. See Preventive Maintenance section.
LANGUAGE
Press and hold language logo for 6 seconds to access
ICON Screen Lock and Toolbox.
Perform the touch calibration for the Cybex GO monitor. Touch the
center of each indicator on the Cybex GO monitor.
Connect the Cybex GO monitor to the network. See Cybex GO
installer.
Setup the channels available from the cable TV provider.
tapping the Toolbox
.
icon , then tap the Home icon
39
. The screen