A/V Configuration And Fm Radio Presets - CYBEX 770T Owner's Manual

A/V Device (not shown
for E3 View Monitor)
A/V Config (not shown
for E3 View Monitor)
FM Radio Presets (not
shown for E3 View
Monitor)
PEM Setup
Workout times
Limits
Pause
Sound
Language
Restore Factory
Defaults
Exit Set Up Mode
Exit Set Up Mode by tapping the Toolbox
refresh.

A/V Configuration and FM Radio Presets

Perform this procedure if the unit includes the optional Wireless Audio Receiver Module.
Tools Required:
Headphones (not included)
Setting up the Cybex Wireless Audio Receiver Module requires four steps:
1. Determine the type of transmitter used (MYE 900MHz, Broadcast Vision 863MHz, etc. or TV FM).
2. Set A/V Device to Wireless TV.
3. Assign a TV channel number to each transmitter on the console.
4. Add FM radio station presets (optional).
Cybex Treadmill Product Number 770T Part Number LT-22983-4 M
Select No TV or Wireless TV.
Active when A/V Device is set to Wireless TV. See A/V Config and FM Radio
Presets.
Active when A/V Device is set to Wireless TV. See A/V Config and FM Radio
Presets.
Active when A/V Device is set to Embedded TV. See E3 View Monitor
Controls and E3 View Monitor Setup.
Set Default and Max workout times. Default choices are 20, 30, or 60 minutes.
Max choices are 20, 30, 60, or OFF.
Set Min Speed, Max Speed, and Max Incline.
Set Pause time. Choices are OFF, 1:00, 5:00, or 10:00 minutes.
Select console beeper settings. Console Beeper - On or Off. Headphone
Beeper - Off, Some, or All. Default Volume - 1 to 30, default is 10.
Select default language to display on CardioTouch screen. Toolbox is only
available in English. Include Optional Languages. Select optional languages
to display on CardioTouch screen. Choices are Include or Off.
Restores all setup variables back to factory defaults. Does not affect Time
or Date.
icon, then tap the Home icon
Page 33 of 105
. The screen will