Liquid Damage; Specifications - Panasonic KX-TS560FX Operating Instructions Manual

Problem
While programming or
searching, the unit starts to
ring and stops the program/
search.
The display exits the caller list.
You cannot redial by pressing
{REDIAL}.
Information stored in the redial
list is erased.

Liquid damage

Problem
Liquid or other form of
moisture has entered the unit.
Caution:
≥ To avoid permanent damage, do not use a microwave oven to speed up the drying process.

Specifications

Power source:
Dimensions (H x W x D):
Mass (Weight):
Operating conditions:
Note:
≥ Design and specifications are subject to change without notice.
≥ The illustrations in these instructions may vary slightly from the actual product.
Cause/solution
≥ A call is being received. Answer the call and start again
after hanging up.
≥ Do not pause for over 60 seconds while searching.
≥ If the last number dialled was more than 32 digits long, the
number will not be redialled correctly.
≥ If "
" flashes, replace the batteries as soon as possible.
Otherwise, information stored in the redial list may be
erased. Store the desired item in the phonebook memory,
if necessary before the battery replacement.
Cause/solution
≥ Disconnect the telephone line cord from the unit. Remove
the batteries from the unit and leave to dry for at least 3
days. After the unit is completely dry, reconnect the
telephone line cord. Insert the batteries.
From telephone line
From 3 AA (LR6, R6, UM-3) batteries
Approx. 95 mm k 190 mm k 196 mm
Approx. 588 g (KX-TS560FX)
Approx. 618 g (KX-TS580FX)
5 °C–4 0 °C, 20 %j80 % relative air humidity (dry)
Useful Information
25