Ricoh MP 6002 User Manual page 227

Message
"Magazine or Booklet mode
is not available due to mixed
image mode."
"Maximum number of sets is
n."
(A figure is placed at n.)
"Original(s) is being
scanned for a different
function."
"Please wait."
Causes
You selected the
"Magazine" or "Booklet"
function for originals
scanned using different
functions, such as copy and
printer.
The number of copies
exceeds the maximum copy
quantity.
A function of the machine
other than the Copier
function is being used such
as the Document Server
function.
The destination list is being
updated from the network
using Web Image Monitor.
When Messages Are Displayed on the Control Panel
Solutions
Make sure originals for the
"Magazine" or "Booklet" function are
scanned using the same function.
You can change the maximum copy
quantity from [Max. Copy Quantity] in
[General Features] under [Copier /
Document Server Features]. For details
about Max. Copy Quantity, see
"General Features", Copy/ Document
Server .
Cancel the job that is being processed.
For example, press [Exit], and then
press the [Home] key. Next, press the
[Document Server] icon on the [Home]
screen, and then press the [Stop] key.
When the message "The Stop key has
been pressed, scanning, and also
other print jobs that were being
processed and which could be
stopped, have been suspended. To
continue scanning and printing press
[Continue], to cancel scanning press
[Cancel Scanning]. To delete other
suspended jobs press [Job List]."
appears, press [Cancel Scanning].
Wait until the message disappears. Do
not switch off the power while this
message is displayed. Depending on
the number of destinations to be
updated, there may be some delay
before you can resume operation.
Operations are not possible while this
message is displayed.
165