Setting Originals - Toshiba GD-1221 Operator's Manual

2 BASIC FUNCTIONS
LT/A4 size originals are rotated 90 degrees so that they are sent as LT-R/A4-R originals dur-
ing memory transmissions. They will be reduced 50% and transmitted as ST/A5 originals
during on-hook and off-hook transmissions.
ST-R (A5-R) / B5-R originals are sent as LT-R (A4-R) sized originals.

Setting Originals

When setting originals on the glass
Originals are sent in the order they are placed on the original glass in both memory TX and
direct TX modes. In direct TX mode, only one page can be sent at a time.
Do not place heavy objects (8.8 lb./4 kg or more) on the original glass and do not press on it with
force.
Breaking the glass could cause personal injury.
1
Raise the Platen Cover
(optional), Automatic Docu-
ment Feeder (optional), or
Reversing Automatic Docu-
ment Feeder (optional), and
place the original A with its
face down on the glass.
2
Align the original against
the left inner corner of the
glass.
Different size originals can also
be sent in one transmission.
If an original other than LT/A4
size is placed, the pre-entered
sender information will be
printed in the area shown B in
the figure when the original is
sent to the remote fax.
To enter the sender information,
see
Terminal ID".
38 About Originals
P.204 "Registering the
A
B