Document Processor (Dp) - Kyocera ECOSYS FS-1020MFP Service Manual

2-1-8 Document processor (DP)

The original document placed on the document table is transfered to the document conveyer unit as the DP
forwarding roller and the DP feed roller rotate.
The original document transfered is optically scanned by the CIS during it passes the contact glass.When
scanning is complete, the original document is ejected onto the original document table by the eject roller.
7
8
1. DP forwarding roller
2. DP feed roller
3. DP front separation pad
4. DP separation pad
5. DP original sensor (DPOS)
4
2
11 9 10
Figure 2-1-19 Document processor
6. Actuator (DP original sen-
sor)
7. DP conveying roller
8. DP conveying pulley
9. Reading guide
10. DP timing sensor (DPTS)
DPM
DPOS
DPTS
Figure 2-1-20 Document processor
3 1 6 12
5 13 14
DPMOTA1, DPMOTA2
DPMOTB1, DPMOTB2
DPPAPER YC19-6
TIMING YC19-3
2-1-15
2M4/2M5/2M6/2M7-1
15
16
11. Actuator (DP timing sensor)
12. DP eject roller
13. DP eject pulley
14. Original eject table
15. Original table
16. Contact glass (Machine)
MPWB
YC19-7,8,9,10