Kyocera ECOSYS FS-1020MFP Service Manual page 99

Message Display
ERA client tool, and
Load error. Add paper
Load paper in cas- Add paper
sette.
Maximum number Error has occurred
of scanned pages.
Memory is full. Memory overflow
Paper jammed in Paper jam
document proces-
sor.
Paper jammed in Paper jam
the rear cover.
Place original and Add paper
press Start key.
Remove original Remove original
from document pro- from document
cessor. processor.
Remove the paper Top tray full
of inner tray.
Replace MK. Replacing the Main-
tenance Kit
Scanner memory is Memory full
full.
Message Dis-
played in KYOC-
the Status Monitor
Meaning
The paper size and paper
type settings selected at the
time of faxing are different
from KYOCERA Client Tool
settings.
The paper size setting
selected at the time of print-
ing are different from KYOC-
ERA Client Tool settings.
The number of scanned
pages exceeds the maxi-
mum number.
Unable to continue the job as
the memory is used up.
A paper jam has occurred in
the document processor.
Paper jam A paper jam has
occurred.
-
An original remains in the
document processor.
The inner tray is full of paper. The machine pauses after 100
Replacement of the mainte-
nance kit is necessary at
every 100,000 images of
printing.
Scanning cannot be per-
formed due to insufficient
memory of scanner.
1-4-23
2M4/2M5/2M6/2M7
Remedy
Check the paper size and
paper type settings.
Check the paper size setting.
The maximum number of
scanned original pages is 99.
Only the scanned pages are
available. Press [OK] key and
the job will be canceled.
Change the print resolution
from Fast 1200 to 600 dpi.
Remove the jammed paper
(see page 1-4-2).
Remove the jammed paper
(see page 1-4-2).
Place the original in the docu-
ment processor again and
press [Start] key.
Remove originals from the doc-
ument processor, put them
back in their original order, and
place them again. Press [OK]
key to resume printing. Press
[Stop/Reset] key to cancel the
job.
sheets are printed. Remove
paper from the inner tray and
press [OK] key to resume print-
ing.
Replace Maintenance Kit (see
page 2-4-2).
Only the scanned pages are
available. Press [OK] and the
job will be canceled.