Assembly - Keys Fitness HealthTrainer HT65T.1 Owner's Manual

Assembly

The Health Trainer 65T Treadmill will require assembly before operating. After opening the box, remove
any packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet.
Locate the hardware pack and identify the following parts required for assembly.
Parts List:
1. Owner's Manual
2. Base Assembly
3. Console Assembly
4. Left and Right Upright
5. Safety Key (Reed Switch)
6. Left and Right Fender
7. Left and Right Outside Handle Covers
8. Left and Right Inside Handle Covers
9. Allen Wrench
10. Philip Screw M6x12 (Qty. 6)
11. Philip Screw ST4.2x13 (Qty. 8)
12. Allen Bolt M8x15 (Qty. 8)
13. Washer 9x22x2 mm (Qty. 8)
2
4
4
6
6
10
11
3
5
9
1
7
12 13
5
7
8
8