Fixture Installation - Elation CUEPIX BLINDER WW2 User Manual

F I X T U R E I N S T A L L A T I O N
C A U T I O N S
• For added protection, mount the fixture in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
• Ambient operating temperature range for this fixture is 14°F to 113°F (-10°C to 45°C).
Do not use the fixture under or above this temperature.
• Before mounting the fixture to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the fixture. (51 lbs / 112 kg)
• Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable.
• Never stand directly below the device when mounting, removing or servicing.
POWER LINKING
Max number of units that can be power linked is 5 units @110V and 11 units @220V.
CLAMP MOUNTING
The CUEPIX BLINDER WW2
mounting this fixture to truss be sure to secure an appropriately rated clamps to the
yoke/rigging bracket using a M10 screw fitted through the center hole.
F L A M M A B L E M A T E R I A L W A R N I N G
Keep fixture at least 5.0 ft (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L C O N N E C T I O N S
A q u a l i f i e d e l e c t r i c i a n s h o u l d b e u s e d f o r a l l
e l e c t r i c a l c o n n e c t i o n s a n d / o r i n s t a l l a t i o n s .
™
provides an integrated yoke/rigging bracket. When
10
w w w . e l a t i o n l i g h t i n g . c o m
CUEPIX BLINDER WW2™ User Manual Ver. 1