Fixture Installation - Elation SIXPAR 200WMG User Manual

F I X T U R E I N S T A L L A T I O N
C A U T I O N S
• For added protection, mount the fixture in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
• Min/Max ambient operating temperature for this fixture is 5°F to 113°F (-15°C to 45°C).
• Do not use the fixture under or above this temperature.
• Before mounting the fixture to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the fixture. (126 lbs / 57 kg)
• Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable.
• Never stand directly below the device when mounting, removing or servicing.
Ensure ALL connections and end caps are properly sealed with a dielectric
grease (available at most electrical suppliers) to prevent water corrosion and/or
electrical short circuit.
POWER LINKING
Max number of units that can be power linked is 8 units @110V and 18 units @240V.
CLAMP MOUNTING
The SIXPAR 200IP
mounting this fixture to truss be sure to secure an appropriately rated clamp using
an M10 screw fitted through the center hole of the Dual Yoke / Floor Stand.
SECURING
Regardless of the rigging option you choose for your SIXPAR 200IP
sure to secure your fixture with a safety cable.
F L A M M A B L E
Keep fixture at least 5.0 ft (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L
A q u a l i f i e d e l e c t r i c i a n s h o u l d b e u s e d f o r a l l
e l e c t r i c a l c o n n e c t i o n s a n d / o r i n s t a l l a t i o n s .
™
provides a unique integrated Dual Yoke / Floor Stand. When
w w w . e l a t i o n l i g h t i n g . c o m
M A T E R I A L W A R N I N G
C O N N E C T I O N S
SIXPAR 200IP™ User Manual ver
™
always be