Elation CUEPIX BLINDER WW2 User Manual page 18

Specifications are subject to change without any prior written notice.
MENU OPTIONS / VALUES
CHANNEL
01, 02, 03, 04
CH:
DMX MODE
001 - 512
ADDR:
SLAVE
M O D E
DIMMER
00-99
C1:
DIMMER
0-99
C2:
DIMMER
00-99
F:
OFF = 1,2
Flip
ON = 2,1
Standard, Stage, TV, Architectural,
DimCurve
Theatre, Default
FLIP SETTING
Select the desired starting COB module and chase direction from one of the following
modes below via UP/DOWN buttons and then press ENTER to confirm.
1
Flip = OFF
ELATION© CUEPIX BLINDER WW2™
S Y S T E M M E N U
Set desired DMX Channel Mode
DMX Address Setting
Set unit to Slave Mode
Set manual Dimming value for COB Module 1
*Control of COB Module 1 depends on the Flip setting.
Set manual Dimming value for COB Module 2
*Control of COB Module 2 depends on the Flip setting.
Set manual Flash / Strobe value for COB Module 1
Set chase direction between COB Modules 1 and 2
Set desired Dimming Curve
2
18
w w w . e l a t i o n l i g h t i n g . c o m
DESCRIPTION
2
Flip = ON
CUEPIX BLINDER WW2™ User Manual Ver. 1
1