Program And Operating Instructions; Quick Start / Manual Mode - Keys Fitness 980HRS Owner's Manual

Keys fitness treadmill owner's manual
Table of Contents

Advertisement

Program and Operating Instructions

QUICK START / MANUAL MODE

Plug into a standard wall outlet (110-Volt AC, 15-amp circuit). Attach Safety Key to treadmill console.
Stand on the treadmill and straddle belt.
Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data can
be entered. The TIME window will flash.
Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt starts
moving. Speed or incline may be adjusted by using the appropriate + (increase) or – (decrease) buttons.
To end your workout, press START/STOP button. Belt will gradually slow to zero.
To pause your workout, press PAUSE.
To re-start after pausing: Press the PAUSE button. WARNING: The treadmill belt will resume at the speed the
treadmill was moving before pausing.
Countdown Time, Preset Speed and/or Incline: Time, Speed, and Incline may be preset prior to getting
started. After pressing the POWER button, the time window will blink. Use the SPEED/TIME + or – arrows to
select your workout time, then press the ENTER PROGRAM button. The SPEED/TIME window will now be
flashing. Using the same + or – arrows, select the speed for your workout, then press ENTER PROGRAM. Now
the INCLINE window will be flashing. Use the INCLINE + or – arrows to set your workout incline, then press
ENTER PROGRAM. To start, press the START/STOP button.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

980s

Table of Contents