Scanning All Of The Tracks On All Of The Cds (Scan); Interrupting Playback (Pause); Naming Cds - Blaupunkt Casablanca CD50 Operating Instructions Manual

CD CHANGER OPERATION
changers first play all of the tracks on a
CD in random order and then select the
next CD in the changer.
Stopping the MIX function
To stop the MIX function, press 5
MIX > repeatedly until "MIX OFF"
appears briefly in the display and
MIX no longer lights up.
Scanning all of the tracks on all
of the CDs (SCAN)
To scan all of the tracks on all of
the CDs in ascending order, press
OK ; for longer than two sec-
onds.
"SCAN" will appear in the display.
Stopping the SCAN function
To stop the SCAN function, press
OK ; briefly.
The track currently scanned will contin-
ue playing.
Note:
It is possible to adjust the scan time. For
more information, read the section on
"Adjusting the scan time" in the chapter
on "Radio Operation".

Interrupting playback (PAUSE)

>.
Press 3
"PAUSE" will appear in the display.
Stopping PAUSE
> during the pause.
Press 3
Playback will resume.
46

Naming CDs

To help you to identify your CDs more
easily, the car audio system allows you
to individually name up to 99 CDs. The
name can be made up of up to seven
letters.
If you attempt to enter more than 99
names, "FULL" will appear in the display.
Entering/editing CD names
Press MENU 8.
: to select "CDC
Press
NAME".
Press or
The car audio system is now in selec-
tion mode.
: to select the CD
Press
you would like to name.
Press or
Now you are in the edit mode. If the CD
you selected does not yet have a name,
seven dashes will appear in the display.
The first input position will flash.
: to select the letter
Press
you want to enter. If you want to
leave this position blank, select the
dash.
Press or
sor to a different input position.
Press MENU 8 or OK ; to store
the name.
Deleting a CD name
You are listening to a CD and
would like to delete its name.
Press MENU 8.
:.
:.
: to move the cur-