General Information - Graco M73109 A Series Instructions-Parts List Manual

Turbine spray guns series 700, 800, and 900

Hide thumbs

Table of Contents

The Series 700, 800 and 900 Turbine Spray Guns can

spray most coatings or finishes currently being used

for automotive refinish, industrial, aerospace, marine,

wood, plastic and architectural applications.

This spray gun typically utilizes 5 psi (0.34 bar) for

Series 700 and Series 800 and 6 psi (0.41 bar) for the

Series 900 inbound air pressure to produce high

quality paint finishes. The gun produces a cone of air

that carries and directs the paint from the gun to the

surface, minimizing overspray and increasing transfer

efficiency. This enables painters to comply with new

clean air laws that are designed to reduce VOC (vola-

tile organic compounds) emissions, eases paint

application by requiring fewer paint passes to obtain

coverage, and saves on both material and clean-up

time.

Refer to the turbine gun manual, 308–336, for more

information on the operation and use of the turbine

spray gun.

Unpack the Graco Turbine Sprayer from the shipping

carton and inspect for any possible shipping damage.

If necessary, call your distributor.

The contents of the Series 700 Turbine Sprayer,

Model M73109, includes:

1 Series 700 Turbine Sprayer, M73486

1 Turbine Gun, M73200

1 25 ft. hose, M71452

1 Sprayer Instruction Manual, 308–422

1 Gun Instruction Manual, 308–336