26
en | Accessories
4.
5.
Technical data
Operating voltage
Weight
Display medium
Permissible wire gauge
Maximum current consumption
6.7.2
MPA External Detector Alarm Display
Installation note
–
–
–
NOTICE!
The flat side of the prism (see Figure 6.1, item Y) must follow the observer's line of sight.
F.01U.003.448 | 8.0 | 2011.10
Connect the FAA-420-RI via two terminals.
_
+
FAA-420-RI
Place the cap on the base plate in such a way that the two hooks (item A) are inserted
into the slits. Press the cap lightly onto the base plate until the snap-fit hook (item C)
engages.
Fitted directly to the wall or ceiling.
To feed cables through for surface mounting, punch out the prepared entry points (see
Figure 6.1, item X) on the housing.
For flush-mounted cable insertion, feed the cable through the opening beneath the
connection board.
Operation Guide
Automatic Fire Detectors LSN improved
C
b1/+V
5–30 V DC
45 g
2 LEDs
0.6–2 mm
20 mA
Bosch Sicherheitssysteme GmbH
version