Yaesu FTDX9000MP Operation Manual page 160

M M M M M M M M M M
ENU ENU ENU ODE ODE ODE
ENU ENU ODE ODE
102. SUB-CW-SHAPE
Function: Selects the passband characteristics of
the Sub band (VFO-B) DSP filter for the CW mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
103. SUB-CW-SLOPE
Function: Selects the shape factor of the Sub band
(VFO-B) DSP filter for the CW mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
104. SUB-CW-NARROW
Function: Selects the passband of the Sub band
(VFO-B) DSP filter for the CW "narrow" mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
105. SUB-PSK-SHAPE
Function: Selects the passband characteristics of
the Sub band (VFO-B) DSP filter for the PSK mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
106. SUB-PSK-SLOPE
Function: Selects the shape factor of the Sub band
(VFO-B) DSP filter for the PSK mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
107. SUB-PSK-NARROW
Function: Selects the passband of the Sub band
(VFO-B) DSP filter for the PSK "narrow" mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
Page 158
RX DSP G
ROUP
108. SUB-RTTY-SHAPE
Function: Selects the passband characteristics of
the Sub band (VFO-B) DSP filter for the RTTY mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
109. SUB-RTTY-SLOPE
Function: Selects the shape factor of the Sub band
(VFO-B) DSP filter for the RTTY mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
110. SUB-RTTY-NARROW
Function: Selects the passband of the Sub band
(VFO-B) DSP filter for the RTTY "narrow" mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
111. SUB-SSB-SHAPE
Function: Selects the passband characteristics of
the Sub band (VFO-B) DSP filter for the SSB mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
112. SUB-SSB-SLOPE
Function: Selects the shape factor of the Sub band
(VFO-B) DSP filter for the SSB mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
113. SUB-SSB-NARROW
Function: Selects the passband of the Sub band
(VFO-B) DSP filter for the "narrow" SSB mode.
Available Values: 200/400/600/850/1100/1350/1500/
1650/1800/1950/2100/2250 Hz
Default Setting: 1800 Hz
FT 9000MP O
DX PERATION
M
ANUAL