Table of Contents
Advertisement
4.
To view the events from the oldest to the newest, press [•]. The display
contains the following information.
º
Event
º
Date
(Month/Day)
This screen shows an opening of Partition 3 on September 25
user 75. The r shows that this event is not programmed to be reported to the
central monitoring station. Refer to Appendix A on page 21 for a list of possible log
messages.
ADJUSTING THE VIEW / BRIGHTNESS OF THE LCD
1.
Enter [r] [9] [1]. The LCD will prompt for a code.
2.
Enter [master code]. The LCD will prompt you to raise or lower the view.
3.
Use [•] [–] to raise or lower the viewing angle of the text.
4.
Press [r] to advance to the Brightness option. The LCD will prompt you to
brighten or dim the LCD lighting. Use [•] [–] to adjust to desired brightness.
5.
Press [#] to exit.
SETTING THE SYSTEM CLOCK
1.
Enter [r] [9] [7]. The LCD Screen will prompt for a code.
2.
Enter [master code]. The time and date will be displayed with the current
hour flashing.
3.
Use [•] [–] to select the proper hour.
4.
Press [r] to move to the minutes, day of week, date, month, and year.
5.
Repeat Steps 3 and 4 until the entire time and date are set.
14
Open
9/25
17:57
ü
Time shown in
24 hour format
³
75
»
P3*
and r indicates an
event not reported
User or Zone ID
Indicates partition
th
at 5:27 p.m. by
LCD Keypad
Advertisement
Table of Contents
