Reading The Event Log; Adjusting The View / Brightness Of The Lcd - GE NetworX NX-148E User Manual

READING THE EVENT LOG

The control panel has an event log that can be retrieved using a master code.
This log contains a listing of the events along with date, time, and partition where
the event occurred.
To view the log, press r
Step 1
you for a code.
Step 2 Enter your master code. The LCD screen will now show the most
recent event.
To view the events from most recent to the oldest, press – .
Step 3
To view the events from the oldest to the newest, press • . The
Step 4
display contains the following information.
Event
Open
9/25
Date
(Month/Day)
This screen shows an opening of Partition 3 on September 25
user 75. The [r] shows that this event is not programmed to be reported to the
central monitoring station. Refer to Appendix A on page 23 for a list of possible
log messages.

ADJUSTING THE VIEW / BRIGHTNESS OF THE LCD

Enter r
Step 1 9
Step 2 Enter [master code]. The LCD will now prompt you to raise or lower the
view.
Using the – • scroll keys to the right of the LCD, you can raise or
Step 3
lower the viewing angle of the text.
To advance to the Brightness option, press r
Step 4
you to brighten or dim the LCD lighting. Use the scroll keys again to
adjust to desired brightness.
When completed, exit by pressing r
Step 5
NX-148E LCD Keypad
9 0 . The LCD screen will prompt
75
17:57 P3*
ü
Time shown in
24-hour format
1 . The LCD Screen will prompt for a code.
User or Zone ID
Indicates partition
and indicates an
event not reported
th
at 5:27 p.m. by
The LCD will prompt
15