License Plate Lamp; Electrical System; Replacement Bulbs - Cadillac 2011 Escalade Owner's Manual

License Plate Lamp

1. Remove the two screws holding
each of the license plate lamps
to the molding that is part of the
liftgate.
2. Twist and pull the license plate
lamp assembly forward through
the molding opening.
3. Remove the bulb socket from
the lamp assembly by turning it
counterclockwise. Pull the bulb
straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 2 to
reinstall the license plate lamp.

Replacement Bulbs

Exterior Lamp
Back-up Lamp
License
Plate Lamp
For replacement bulbs not listed
here, contact your dealer.

Electrical System

Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load
is too heavy, the circuit breaker
Bulb
opens and closes, protecting the
Number
circuit until the current load returns
to normal or the problem is fixed.
7441
This greatly reduces the chance of
168LL
circuit overload and fire caused by
(W5WLL)
electrical problems.
Vehicle Care 10-41