Tire Sidewall Labeling - Cadillac 2011 Escalade Owner's Manual

10-52 Vehicle Care

Tire Sidewall Labeling

Useful information about a tire
is molded into the sidewall.
The following illustration is an
example of a typical P Metric
tire sidewall.
Passenger (P Metric) Tire
(A) Tire Size The tire size
:
code is a combination of letters
and numbers used to define a
particular tire's width, height,
aspect ratio, construction type,
and service description. See the
Tire Size illustration later in this
section for more detail.
(B) TPC Spec (Tire
Performance Criteria
Specification) Original
:
equipment tires designed to
GM's specific tire performance
criteria have a TPC specification
code molded onto the sidewall.
GM's TPC specifications meet
or exceed all federal safety
guidelines.
(C) DOT (Department
of Transportation)
:
The Department of
Transportation (DOT) code
indicates that the tire is in
compliance with the U.S.
Department of Transportation
Motor Vehicle Safety Standards.
(D) Tire Identification Number
(TIN) The letters and numbers
:
following DOT code are the Tire
Identification Number (TIN). The
TIN shows the manufacturer and
plant code, tire size, and date
the tire was manufactured.
The TIN is molded onto both
sides of the tire, although only
one side may have the date of
manufacture.
(E) Tire Ply Material
:
of cord and number of plies in
the sidewall and under the tread.
The type