Cadillac 2011 Escalade Owner's Manual page 193

5-54 Instruments and Controls
If a switch is set between
the up and down position,
write Middle.
The switch settings
written down in Step 2
now become the button
strokes to be entered
into the Universal Home
Remote in Step 4. Be sure
to enter the switch settings
written down in Step 2,
in order from left to right,
into the Universal Home
Remote, when completing
Step 4.
3. From inside your vehicle,
first firmly press all three
buttons at the same time
for about three seconds.
Release the buttons to put the
Universal Home Remote into
programming mode.
A. Left Button ( Up + or On )
B. Middle Button ( Middle 0 or
Neutral )
C. Right Button ( Down
or Off )
4. The indicator lights will blink
slowly. Enter each switch
setting from Step 2 into your
vehicle's Universal Home
Remote. You will have two and
one-half minutes to complete
Step 4. Now press one button on
the Universal Home Remote for
each switch setting as follows:
If you wrote Left, press
the left button (A) in the
vehicle.
If you wrote Right, press
the right button (C) in the
vehicle.
If you wrote Middle, press
the middle button (B) in the
vehicle.
5. After entering all of the switch
positions, once again firmly
press and release all three
buttons at the same time.
The indicator lights will turn on.