Camera Title ( Menu => Screen => Camera Title) - Honeywell ScanDome iii HSDC-251N/P Operation & Programming Manual

3. Twist the joystick handle on the No. column to enter zone title. You can select alphanumeric
characters by rotating the handle. Move to the next character by pushing the Joystick to
the right. To finish entering the title, push the Joystick down.
4. To adjust panning limit, press the SHFT/PGM key and hold down. Then use the Joystick
to go the desired direction. The end limit must be in an increasing direction. (Start < End).
(Or twist zoom handle or hit zoom button to start PTZ control for view selection and hit the
Focus button to exit from control mode.)
5. PREV NEXT : got to previous page or next page of the menu
6. Save and exit the program by pushing the Joystick to the right. Press ESC to exit the
program without saving.
3.3.5 CAMERA TITLE ( MENU => SCREEN => CAMERA TITLE)
Push the joystick handle to the right to select CAMERA TITLE options.
1. Twist the joystick handle on the TITLE
select alphanumeric characters by rotating the handle. Move to the next character by
pushing the Joystick to the right. To finish entering the title, push the Joystick down.
3. Select DISPLAY option whether TITLE display or not.
4. Select POSITION option whether coordinate angle display or not.
5. Save and exit with joystick handle to right ( Or ESC to exit without saving)
CAMER TITLE
TITLE : CAM NO.
DISPLAY : ON
POSITION : ON
SAVE AND EXIT
: CAMERA NO. to enter camera title. You can
28