Table of Contents
Advertisement
Getting started
Expand your telephone system
Your telephone base can support up to 12 handsets/pendants. Each
device must be registered to the telephone base before use.
The handset(s) and pendant that come with the package are already
registered to the telephone base. You can add new handsets (SN6107,
purchased separately) and new pendants (SN6167, purchased
separately) to your telephone base. Additional handsets are assigned
numbers in the sequential order.
Add and register a handset
When first purchased, each accessory handset shows To register HS,
see manual. The new handset should be charged without interruption
for at least 30 minutes before registering it to the telephone base.
Make sure the handset is out of the handset charger and is put near the
telephone base. Make sure the handset shows To register HS,
see manual before you begin registration.
To register a handset:
Press MENU on the telephone base when it
1.
is not in use.
or to scroll to Settings, then
2.
Press
press SELECT.
or to scroll to Registration, then
3.
Press
press SELECT. The telephone base shows
Registering... Please wait.
Press QUIET
4.
handset shows Registering... Please wait.
Then HANDSET X Registered appears
on the cordless handset and the telephone
base, and both devices beep. The handset is now registered with the
telephone base. It takes up to 60 seconds to complete registration.
If registration fails, the telephone base displays Registration failed.
Start again from Step 1 above.
#
on the cordless handset. The
--:--
Dial mode
RegistrationR
--:--
15
SETTINGS
BACK
SELECT
Registering...
Please wait
BACK
--/--
--/--
Advertisement
Table of Contents
