Answering system operation
Remote access
A two-digit security code is required to access the answering system
remotely from any touch-tone telephone. The preset code is 19. See
Remote access code on page 106 to change it.
1.
Dial your telephone number from any touch-tone telephone.
2.
Enter the two-digit security code after the announcement and the
long beep.
3.
The system announces, "Press star for reminder or press pound to
listen to messages." Press
•
After pressing
remote commands:
Command
1
2
3
4
, you can enter one of the following
Function
Review reminders.
Set reminders.
End the call.
Turn reminder off.
#
or
.
117