Connecting The Wiring - Honeywell HCC10 User Manual

Height of the A × Distance between camera and object (m)
area of view
=
(m) Focal length of lens (mm)
Width of the B × Distance between camera and object (m)
area of view
=
(m) Focal length of lens (mm)
Mounted Lens 1/2" Lens
A
B
Note Do not attach the C-mount adapter when using
a CS-mount lens.
Note In the illustration below, "L" should be as shown
in the table. If "L" exceeds the value in the table,
it may damage the inside of the camera and
make correct mounting impossible.
Recommended
Focal Point Lens
L
C-mount *
CS-mount ** 12.5
Lens
* With the C-mount adapter attached.
** With the C-mount adapter removed.
Back Focus
10
1/3" Lens
4.8 3.6
6.4 4.8
Back Focus Distance
(mm) "L" (mm)
17.526 < 9
< 4

Connecting the Wiring

Note Do not turn on the power of any connected
equipment until all connections are completed.
1. Connect the power input of the camera to an
external 12 V DC or 24 V AC power supply.
2. Connect the video output of the camera to the
video input of your monitor.
Alarm I/O
D/N input
Video output
Power input
(12 V DC or 24 VAC)
RS-485
www.honeywell.com/security