Motion Detection - Honeywell HCC10 User Manual

Motion Detection

The motion detection function detects moving objects
in a scene. Motion detection is triggered when the
differences between frames in a monitored area exceed
a specific level.
1. Press SET to display the Setup menu.
2. Move the cursor to MOTION DET , and then
press the left or right setup button to set the
motion detection function.
MOTION DET
DETECT SENSE
BLOCK DISP OFF
MONITOR AREA OFF
AREA SEL 1/4
TOP
BOTTOM
LEFT
RIGHT
RETURN 
800-15952 - A - 09/2013
111
000
000
000
000
DETECT Sets the motion detection sensitivity.
SENSE
BLOCK Controls the motion detection block
DISP display.
MONITOR Sets whether to use the monitoring
AREA frames.
AREA SEL Selects the monitoring frame to be set.
TOP Sets the top side of the monitoring
frame.
BOTTOM Sets the bottom side of the monitoring
frame.
LEFT Sets the left side of the monitoring
frame.
RIGHT Sets the right side of the monitoring
frame.
19