Honeywell HCC10 User Manual page 16

ATW
SPEED
DELAY CNT
ATW FRAME x2.00
ENVIRONMENT INDOOR
RETURN 
SPEED Set the ATW speed to a value
between 0 and 255.
DELAY CNT Set the delay time between
monitoring the changing lighting
conditions and adjusting the white
balance.
ATW FRAME Set the ATW image size. Select x0.50,
x1.00, x1.50, or x2.00.
ENVIRONMENT Set to INDOOR or OUTDOOR.
• In PUSH mode, white balance is adjusted
automatically according to the color temperature.
16
• In USER1 and USER2 mode, white balance is
adjusted manually. USER1 mode is suitable for
indoor applications generally. USER2 mode is
suitable for environments with fluorescent light.
USER1 WB
B-GAIN
R-GAIN
RETURN 
B-GAIN Set the blue gain to a value between
0 and 255 .
R-GAIN Set the red gain to a value between
0 and 255 .
• In ANTI CR mode, the system suppresses color
rolling caused by small differences between the
flicker frequency of non-inverter fluorescent lights
and the drive frequency of the image sensor
devices.
www.honeywell.com/security