Removing The Dome Cover; Connecting The Wiring - Honeywell HD3VC4SHR Quick Install Manual

Removing the Dome Cover

1. Gently turn the dome cover (#5 on
unlock and pull free of the housing.
2. Remove the inner liner (#4) by gently pulling it free of the two notches
(#2) in the housing (#1). Set the dome (and liner) aside.
Figure 2

Connecting the Wiring

Follow Figure 1 to connect the video output connector (#a) and 24 VAC/12
VDC power connector (#b).
Rev 1.00
Dome Cover Removal.
1
2
3
4
5
Figure 2) counter-clockwise to
Legend
1 Camera housing
2 Notches (x2)
Tilt adjustment bracket and
3
thumbnuts
4 Inner liner
5 Dome cover
4 Document 900.0510
05/06