EverFocus ED910 User Manual page 12

c. To configure the OSD Menu, using the function button.
Note: The function button is not only for direction control, also for switching Video
format and Video output. Please follow the detailed instruction as below:
 Press the "DOWN" button key over 5s to switch video format from PAL to NTSC.
 Press the "LEFT" button key over 5s to switch video output from 720p to 960H
(720p is the default).
 Press the "RIGHT" button key over 5s to switch video output from 960H to 720p.
d. To adjust the Zoom / Focus, using the Zoom / Focus screws. Tighten the zoom /Focus
screws using the supplied Screw Driver.
9. Put the liner back and secure the camera cover cap back to the camera.
ED910/930 eZ.HD Indoor Dome Camera
12