Table of Contents
Advertisement
My Camera
Charging the battery and turning on your camera
Charging the battery
Before you use the camera for the first time, you must charge the battery.
Plug the small end of the USB cable into your camera, and then plug the
other end of the USB cable into the AC adapter.
When using a USB 2.0 cable, plug the USB cable into the lower side of the
USB port. If the plug connectors are forced, the device may be damaged. The
manufacturer is not responsible for any loss of data.
Status lamp
Red light on: Charging
Green light on: Fully charged
Red light blinking: Charging error
Charge the battery while the camera is turned off.
Use only the AC adapter and USB cable supplied with your camera. If you use
another AC adapter, the camera battery may not charge or work properly.
When using a USB 3.0 cable (optional), connect the USB cable as shown in the
illustration.
39
Advertisement
Table of Contents
